Yamaha Smax Engine Oil Capacity (2015-2022)

The Yamaha Smax 155 is an automatic motorbike produced by Yamaha from 2015 to 2022. The Yamaha Smax has an engine with a combustion chamber capacity of 155 cc. Similar to yamaha aerox and yamaha Nmax engines.  The following is information about the yamaha Nmax engine oil capacity. This information is accurate based on reference … Read more

Honda PCX 160 Maintenance Schedule

This information page is for PCX 160 year: 2021, 2022, 2023 The maintenance schedule specifies the maintenance requirements necessary to ensure safe, dependable performance, and proper emission control. Maintenance work should be performed in accordance with Honda’s standards and specifications by properly trained and equipped technicians. Your dealer meets all of these requirements. Keep an … Read more

Honda Pcx 160 Gear Oil Capacity

The Honda PCX 160 is an automatic transmission type motorcycle. which means, you must pay regular attention to 2 parts that must be oiled or lubricated.  The first is engine oil. the second is transmission oil or gearbox oil. The gearbox is located in the rear cvt area near the rear wheel.  Generally, gearbox oil … Read more

Yamaha YZ250 Coolant Capacity

 CHANGING THE COOLANT A hot radiator is under pressure. Therefore, do not remove the radiator cap when the engine is hot. Scalding hot fluid and steam may be blown out, which could cause serious injury. When the engine has cooled, open the radiator cap as follows: Place a thick rag or a towel over the … Read more

Yamaha YZ250 Transmission (gearbox) Oil Capacity

  CHECKING THE TRANSMISSION OIL LEVEL 1.Start the engine, warm it up for several minutes and wait for five minutes. 2.Place the machine on a level place and hold it up on upright position by placing the maintenance stand under the engine. 3.Check: Transmission oil level a.Remove the oil check bolt “1”. b.Inspect the oil … Read more

Yamaha YZ250 Maintenance Schedule Intervals

  MAINTENANCE INTERVALS After a break-in or before each race, always check the points shown in “TORQUE-CHECK POINTS” for tightening torques and retighten them. Periodic inspection is essential in making full use of the machine performance. The life of parts varies significantly according to the environment in which the machine runs (e.g., rain, dirt, etc.). … Read more

Yamaha MT09 Recommended Fuel Specs

 Make sure there is sufficient gasoline in the tank. Gasoline and gasoline vapors are extremely flammable. To avoid fires and explosions and to reduce the risk of injury when refueling, follow these instructions. Before refueling, turn off the engine and be sure that no one is sitting on the vehicle. Never refuel while smoking, or … Read more

Yamaha MT09 Adjusting the shock absorber assembly

 This shock absorber assembly is equipped with a spring preload adjusting ring and a rebound damping force adjusting screw. To avoid damaging the mechanism, do not attempt to turn beyond the maximum or minimum settings. Spring preload Turn the adjusting ring in direction (a) to increase the spring preload. Turn the adjusting ring in direction … Read more

Yamaha MT09 brake fluid Specs

Before riding, check that the brake fluid is above the minimum level mark. Check the brake fluid level with the top of the reservoir level. Replenish the brake fluid if necessary. Front brake Minimum level mark Rear brake Minimum level mark Specified brake fluid: DOT 4 Improper maintenance can result in loss of braking ability. … Read more

Yamaha MT09 Clutch lever free play And Adjusting

 Measure the clutch lever free play as shown. Clutch lever free play adjusting bolt Clutch lever free play Clutch lever free play: 10.0–15.0 mm (0.39–0.59 in) Periodically check the clutch lever free play and, if necessary, adjust it as follows. To increase the clutch lever free play, turn the clutch lever free play adjusting bolt … Read more