Honda 2023 CBR650R Price and Specs

Base Price (2023) MAT GUNPOWDER BLACK METALLIC $11,799 Engine & Drivetrain Engine Type Liquid-cooled inline four-cylinder Displacement 649 cc Bore & Stroke 67 mm x 46 mm Compression Ratio 11.6:1 Maximum output (kW) 70 Maximum power (PS) 95 Maximum output speed (rpm) 12000 Maximum torque (N・m) 64 Maximum torque (kgf・m) 6.5 Maximum torque rotation speed … Read more

YAMAHA YZ250F TIGHTENING TORQUES CHARTS

  GENERAL TIGHTENING TORQUE SPECIFICATIONS This chart specifies tightening torques for standard fasteners with a standard ISO thread pitch. Tightening torque specifications for special components or assemblies are provided for each chapter of this manual. To avoid warpage, tighten multi-fastener assemblies in a crisscross pattern and progressive stages until the specified tightening torque is reached. … Read more

YAMAHA YZ250F MAINTENANCE AFTER BREAK-IN

 After a break-in, perform careful maintenance to get ready for the next practice or race. Refer to PRE-OPERATION INSPECTION AND MAINTENANCE. MAJOR MAINTENANCE 1.For the engine Leaks around the engine Check for pressure leaks from the cylinder head or the cylinder, oil leaks from the crankcase or the case cover, leaks from the coolant system, and … Read more

YAMAHA YZ250F STARTING AND BREAK-IN

  FUEL Always use the recommended fuel as stated below. Also, be sure to use new gasoline the day of a race. Recommended fuel Unleaded gasoline (E10 acceptable) Octane number (R+M)/2 91 or higher Fuel tank capacity 6.2 L (1.6 US gal, 1.4 Imp.gal) Use only unleaded gasoline. The use of leaded gasoline will cause … Read more

Yamaha YZ250F INSTRUMENT AND CONTROL FUNCTIONS

  ENGINE STOP SWITCH The engine stop switch “1” is located on the left handlebar. Continue pushing the engine stop switch till the engine comes to a stop. START SWITCH The start switch “1” is located on the right handlebar. Push this switch to crank the engine with the starter. MODE SWITCH The mode switch … Read more

YZ250F SPECIAL TOOLS

The following special tools are required for accurate and complete adjustment and assembly. Using the correct special tool will help prevent damage caused by the use of improper tools or improvised techniques. The shape and tool number used for the special tool differ by country, so two types are provided. Refer to the list provided … Read more