YAMAHA Majesty S specifications

 

The Yamaha Majesty S is a scooter produced by Yamaha Motor Company. It is a smaller, more compact version of the standard Yamaha Majesty scooter and is designed for use in urban areas. The Majesty S is powered by a 125cc, single-cylinder, fuel-injected engine that is capable of producing approximately 8 horsepower. It features a continuously variable transmission (CVT) and has a top speed of around 60 mph (96 km/h). The Majesty S has a fuel capacity of 4.2 gallons (16 liters) and a fuel consumption rate of around 70 miles per gallon. The scooter has a dry weight of approximately 275 lbs (125 kg) and is equipped with a front disc brake and a rear drum brake. It is a popular model in countries where it is sold and is well-regarded for its ease of use and practicality.

Overall length (mm) 2030
Width (mm) 715
Height (mm) 1115
Wheelbase (mm) 1405
Minimum ground clearance (mm) 90
seat height (mm) 795
Vehicle weight (kg) 145
Minimum turning radius (m) 2.1
seat 2
Fuel consumption rate (1) (km/L) 40.0
Metric (1) At 60km/h
Fuel consumption rate (2) (km/L) 37.5
Metric (2) WMTC mode value
Engine model G3K3E
Engine type 4 stroke
number of cylinders 1
cylinder array single cylinder
cooling method water cooling
displacement (cc) 155
Cam/valve drive system OHC (SOHC)
Number of valves per cylinder Four
Inner Diameter (Cylinder Bore) (mm) 58
Stroke (piston stroke) (mm) 58.7
Compression ratio (:1) 11
Maximum output (kW) 11
Maximum power (PS) 15
Maximum output speed (rpm) 7500
Maximum torque (N・m) 14
Maximum torque (kgf・m) 1.4
Maximum torque rotation speed (rpm) 6000
Fuel supply system fuel injection
Fuel tank capacity (L) 7.4
Fuel (type) regular gasoline
Full tank cruising range (approximate, reference value) 296.0
Engine starting method self starter
ignition device Full transistor type
Spark plug standard installation/model CPR8EA-9
Necessary number of spark plugs/total 1
Installed battery/model GT7B-4
battery capacity 12V-6.5Ah 10HR
Engine lubrication method Wet sump type
Engine oil capacity*Total capacity (L) 1.0
Engine oil amount (at oil change) (L) 0.95
Recommended engine oil (SAE viscosity) 10W-40
Clutch type Dry type, multi-plate, centrifugal
Transmission type V-belt type, stepless speed
Primary reduction ratio 1.000
Secondary reduction ratio 8.787
Frame model backbone
caster angle 26°00′
Trail amount (mm) 82
Brake type (front) hydraulic disc
Brake type (rear) hydraulic disc
Compliant standards for brake oil DOT 4
Suspension system (front) telescopic fork
front fork type upright fork
Suspension system (rear) unit swing type
tire (front) 120/70-13
Tire (front) structure name bias
Tire (front) load index 53
Tire (front) speed symbol P.
Tire (front) type tubeless
tire (rear) 130/70-13
Tire (rear) structure name bias
Tire (rear) load index 57
Tire (rear) speed symbol P.
Tire (rear) type tubeless
Wheel rim shape (front) MT
Wheel rim width (front) 3.0
Wheel rim shape (rear) MT
Wheel rim width (rear) 3.5
Tire standard specified air pressure (at passenger capacity/before) 2.00
Tire standard specified air pressure (at passenger capacity/after) 2.25
Headlight rating (Hi) LED
tail light type LED
Speedometer display format Digital
Meter display: fuel gauge Yes
Meter display: engine tachometer Yes
Meter display: Clock Yes
Vehicle equipment: DC socket Yes
Vehicle equipment: Under-seat storage (under-seat trunk) Yes
Vehicle equipment: center stand Yes

Leave a Comment