2000 Acura CL II 3.2 i V6 24V Type S Specs

The Acura CL is a mid-size luxury coupe produced by Acura, the luxury division of Honda Motor Company. The CL II was the second generation of the CL, which was produced from 1999 to 2003. The Acura CL II is a 2-door coupe with a front-engine, front-wheel drive layout. It is classified as a luxury coupe and is equipped with a range of upscale features and amenities. The CL II was available in a variety of trim levels and was offered with a choice of two different engines: a 3.0-liter V6 engine or a 3.2-liter V6 engine. The CL II had a sleek, sporty design with a long hood and a short rear deck, and it was well-regarded for its performance and handling.

The curb weight of the 2000 Acura CL II 3.2 i V6 is approximately 3,495 lbs (1,583 kg). Curb weight is the total weight of a vehicle with standard equipment, liquids (such as oil and fuel), and the weight of the driver and passengers, but without any additional cargo or load. 

Brand Acura
Model CL
Generation CL II
Modification (Engine) 3.2 i V6 24V Type S (263 Hp) Automatic
Start of production 2000 year
End of production 2003 year
Powertrain Architecture Internal Combustion engine
Body type Coupe
Seats 5
Doors 2
Performance specs
Fuel consumption (economy) – urban 12.4 l/100 km
18.97 US mpg
22.78 UK mpg
8.06 km/l
Fuel consumption (economy) – extra urban 8.1 l/100 km
29.04 US mpg
34.87 UK mpg
12.35 km/l
Fuel Type Petrol (Gasoline)
Acceleration 0 – 100 km/h 6.8 sec
Acceleration 0 – 62 mph 6.8 sec
Acceleration 0 – 60 mph (Calculated by Auto-Data.net) 6.5 sec
Maximum speed 235 km/h
146.02 mph
Weight-to-power ratio 6.1 kg/Hp, 162.8 Hp/tonne
Weight-to-torque ratio 5.1 kg/Nm, 194.4 Nm/tonne
Engine specs
Power 263 Hp @ 6100 rpm.
Power per litre 81.9 Hp/l
Torque 314 Nm @ 3500 rpm.
231.59 lb.-ft. @ 3500 rpm.
Engine location Front, Transverse
Engine Model/Code J32A2
Engine displacement 3210 cm3
195.89 cu. in.
Number of cylinders 6
Position of cylinders V-engine
Cylinder Bore 89 mm
3.5 in.
Piston Stroke 86 mm
3.39 in.
Compression ratio 10.3
Number of valves per cylinder 4
Fuel System Multi-point indirect injection
Engine aspiration Naturally aspirated engine
Engine oil capacity 5 l
5.28 US qt | 4.4 UK qt
Engine oil specification 5W-20, 5W-30 / API SL
Coolant 7.5 l
7.93 US qt | 6.6 UK qt
Space, Volume and weights
Kerb Weight 1615 kg
3560.47 lbs.
Trunk (boot) space – minimum 396 l
13.98 cu. ft.
Fuel tank capacity 65 l
17.17 US gal | 14.3 UK gal
Length 4877 mm
192.01 in.
Width 1793 mm
70.59 in.
Height 1410 mm
55.51 in.
Wheelbase 2715 mm
106.89 in.
Front track 1552 mm
61.1 in.
Rear (Back) track 1547 mm
60.91 in.
Drivetrain, brakes and suspension specs
Drivetrain Architecture The Internal combustion engine (ICE) drives the front wheels of the vehicle.
Drive wheel Front wheel drive
Number of gears and type of gearbox 5 gears, automatic transmission
Front suspension Coil spring
Rear suspension Coil spring
Front brakes Ventilated discs
Rear brakes Disc
Assisting systems ABS (Anti-lock braking system)
Steering type Steering rack and pinion
Power steering Hydraulic Steering
Tires size 215/50 R17
Wheel rims size 17

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top